Table of Contents
Advertisement
Manuale Utente – Instrument general settings
regardless of the selected Sound. To do so, select the Fixed option.
Pedals can also perform specific functions, related to the selected Sound or Memory. To do so, select the Subject to
Sound option.
-
Part 1 and Part 2: you can assign the pedal functions to either of these options. Part 1 is the selected Sound while the
keyboard is in Single mode, or the Sound assigned to Part 1 when the keyboard is in Dual or Split mode. Part 2 is the
Sound currently assigned to Part2 when the keyboard is in Dual or Split mode.
A detailed description of each function can be found on the Reference Manual.
The new settings of the Type, Polarity and Mode parameters are immediately saved.
If Mode is set as System or Fixed, also the functions assigned to Part1 and Part2 are immediately saved. If Mode is set as
Subject to Sound, you need to save manually the current Sound or Memory.
Press [EXIT] to leave the page and return to the FUNCTION menu.
NB
The Sustain pedal of the pedal set, and any pedal connected to the [SUSTAIN] connector can be only assigned the
Sustain function.
11.7 FINE TUNING
Physis Piano can be fine tuned by setting the exact frequency (in Hertz). Furthermore, the user can choose from a wide
range of historical temperaments from different ages and countries.
To do so, access the FUNCTION menu and select the Tuning function.
Use [+] and [-] to fine tune the instrument. Frequency is in Hertz.
To use a different temperament, first press [ ], then [+] or [-] to select it. For a short description of each temperament, see
the Reference Manual.
Press [F3] to reset the Equal temperament and the standard tuning (440Hz).
Press [EXIT] to save the settings and return to the FUNCTIONS menu.
11.8 MIDI SETTINGS
To access the configuration parameters of the MIDI interface, select the Midi function under the FUNCTION menu.
To move the cursor, press [ ], [ ], [ ] o [ ]. Press [+] and [-] to adjust the values.
EN - 42
Advertisement
Table of Contents
