Manuale Utente – Instrument general settings
11.4 CHECKING AND UPDATING THE OPERATING SYSTEM RELEASE
When a new operating system update is released (.vpu file) it will be available on the website
Download the file and the copy it to a USB pen.
To check the current operating system release of your Physis Piano, access the FUNCTION menu. Then select the Setup
function; place the cursor on the Software Update field and press [ENTER].
On the bottom right of the screen you will find the Current Release field. It indicates the release that is currently installed
on your instrument.
To update the operating system, connect a USB pen with the .vpu file within and press [ENTER].
After a few seconds, the contents of the USB pen appear on screen.
Use [ ] or [ ] to move the cursor, and [ENTER] to show the folders content. Press [EXIT] to return to the previous (upper
level) folder. Place the cursor on the .vpu file to update.
To visualize other functions under the SETUP menu, press [ ], then [ ] or [ ].
Select the .vpu file and press [ENTER] to start the update. After a short while a pop-up message will appear, showing
information on the currently installed release and the one being loaded.
When the procedure is over, the "Upgrade done" message will appear. Reboot the instrument.
NB
•
Should the system detect errors in the update file, the "Corrupted upgrade file" error message will appear.
Therefore, replace the file with one that is valid.
•
All the error messages that might appear during the upgrade are described in chapter 6.1 of the Reference
Manual.
EN - 40
http://www.physispiano.com
.