Table of Contents
Advertisement
Manuale Utente – Instrument general settings
11. INSTRUMENT GENERAL SETTINGS
The FUNCTION menu contains all settings that do not belong to single Sounds (except for pedals settings) or memories,
but to the whole Physis Piano. To access this menu, press [FUNCTION].
You can recall the following functions:
-
Touch: select the keyboard's velocity curve. For further information about this function see par 8.6.
-
Setup: recall factory settings, check or update the operating system, options, modify time and date.
-
Pedals: assign functions to pedals.
-
Tuning: fine tuning of the instrument, and choose among several temperaments.
-
Midi: MIDI interface settings.
-
Transpose: adjust the transposer. For further information on this function see par 8.5.
-
File Manager: move files between the internal memory and a USB drive.
-
Metronome: set up and activate the metronome. For further information on this function see par 8.7.
To access a function and its corresponding video page, use the arrows Key Touch [ ], [ ], [ ] o [ ] to select it, then
press [ENTER]. The cursor is the brighter icon surrounded by a white rectangle.
To leave this page and return to the previous one press [EXIT] or [FUNCTION].
11.1 RECALLING FACTORY SETTINGS (FACTORY RESET)
To undo all modifications made to Sounds, memories and system functions and recall the standard factory settings, use
the Factory Reset function. To do so, access the FUNCTION menu and place the cursor on the Setup icon. Press [ENTER].
Place the cursor on the Factory Reset field and press [ENTER]. A pop-up message appears:
EN - 38
Advertisement
Table of Contents
