Table of Contents
Advertisement
5
Key Touch [
]: activates/deactivates stand-by mode. Deactivating the stand-
by
function,
that
configurations (volume, sounds, levels etc.) to their previous condition (i.e.before
the instrument was set in stand-by mode).
To put the instrument on stand-by, press the [
Press the Key Touch again to turn it on.
NB
Keep in mind that in Stand-By mode, the instrument still consumes a small amount of electricity; therefore it is best to
use this function only for short periods of time.
4.2 BESIDE THE KEYBOARD
The USB host port is placed just left from the keyboard. The headphones connector is right under it. The USB port can be
used to connect USB memories, in order to exchange data with the internal memory.
1
[
] port: Connect here a USB device.
2
[
] port: Connect your headphones here.
INFORMATION ON USB PENS
•
Always use USB pens formatted with FAT or FAT32 file system (no NTFS).
•
It is recommended to format USB pens with dedicated utilities, provided by the manufacturer (usually on CD-
ROM or web site).
•
If no USB pen is available when required, the following message will appear:
To access a USB pen, plug it into the [
to access it. If the pen is already connected, try disconnecting and reconnecting. Then, check that the USB
device is working and properly formatted.
is,
switching
on
the
] Key Touch twice.
1
2
] connector on the front panel. Then wait a short while before trying
User Manual – Controls and connections
instrument,
will
restore
EN - 11
the
Advertisement
Table of Contents
