Description Of Panels And Connections - Televes RSD-7235 User Instructions

Televes rsd-7235 digital satellite receiver user instructions
Table of Contents

Advertisement

User instructions

3.- Description of panels and connections

Fig. 1
-
Front Panel
Button
To switch the Receiver on and off
Ch
In normal mode, this goes down through the channels; in a menu, it selects the previous element.
Ch
In normal mode, this goes up through the channels; in a menu, it selects the next element.
Display
In normal mode, this displays the channel nº; in STANDBY mode this displays the time.
Fig. 2
-
Rear Panel
Name
TV
To connect the TV using a SCART connector.
VCR
To connect the VCR using a SCART connector.
AUDIO R
Audio output (Right channel).
AUDIO L
Audio output (Left channel).
RS232
Connection to a serial port or to another receiver to update the sofware.
LNB IN
Signal input from the satellite antenna.
AC IN
Connection to the mains (110 - 240 V~).
Fig. 3
-
Remote Control
Button
To switch the Receiver on and off.
MENU
To display the main menu on the TV screen. If it is pressed again, the menu disappears.
EXIT
To return to the previous menu within the menus.
To advance onto the next page on the screen.
To return back to the previous page on the screen.
To execute the selected option in the menu or enter the desired value in any input mode or display the
OK
channel list while watching a programme.
CH
,
To select a programme nº above or below; in menu mode, it selects the following or previous element.
VOL
,
To increase or decrease the volume; in menu mode, it selects the element to the right or to the left.
0 ... 9
To directly enter the data in a menu. These buttons are also used to select a programme to watch.
To activate the menu to select the subtitles language.
FUNC.
In the Channel List, it lets you erase all the programmes.
< -- PR
To return to the previous channel.
TV/SAT
To switch between the TV and SAT modes.
PAUSE
To pause the picture on the screen.
EPG
To display the Electronic Programming Guide (EPG).
TXT
To switch the Teletext on.
INFO
To display information on the channel that is being watched.
TV/RADIO
To switch between different TV or RADIO programmes. It switches between TV List and Radio List.
To select the different types of audio.
ALT
This activates the menu to be able to select the audio language.
To mute the sound.
Function
Function
Function
34
"RSD - 7235"

Advertisement

Table of Contents
loading

Table of Contents