Table of Contents
Advertisement
User instructions
5.- Ready to begin
5.1.- How to start
Switch the TV on as well as all the additional equipment that may be
connected to the system.
Switch the satellite receiver on , by pressing the ON button on the
receiver (
) or on the remote control unit.
Select the TV or Radio mode using the TV/RADIO button.
The Radio mode channels can be identified by the
(The equipment is set to TV mode by default).
5.2.- How to select TV or RADIO channels
The TV/Radio channels can be selected using both the remote control and
the buttons on the receiver.
Press the TV/RADIO button to select the desire service mode (TV
channels or radio channels).
When you can see a channel, press the
channel, or the
button to select the previous channel.
The selected channels will appear straight away with the corresponding
information at the bottom of the screen.
By pressing the INFO button, a window appears on the screen with
information about the programme you are watching.
5.3.- How to adjust the volume
The volume can be adjusted using the remote control.
To increase the volume, press the VOL
volume, press the VOL
There are 33 volume levels that can be seen on the volume level
indicator that appears onscreen.
symbol.
button to select the following
button, and to decrease the
button on the remote control.
37
"RSD - 7235"
(( S ))
2/ 8: eng
1. ASTRA
TP1
Apr. 20
13 : 24
2
CANAL 99
(( S ))
2/ 8: eng
1. ASTRA
TP1
Apr. 20
13 : 24
3
RTL Telev
Advertisement
Table of Contents
