Sonance Sonamp ASAP2 Installation Instructions Manual
Sonance Sonamp ASAP2 Installation Instructions Manual

Sonance Sonamp ASAP2 Installation Instructions Manual

Sonance asap2: install guide

Advertisement

Quick Links

33-2381 asap2 manual.qxd
4/29/02

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: Read all of these instructions before you operate and
save instructions for later use.
1. Read Instructions - all the safety and operating instructions should be read
before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should be retained for
future reference.
3. Heed Warnings - All warnings on the appliance and in the operating
instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5.Water and Moisture- The appliance should not be used near water - for
example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
6. Carts and Stands - The appliance should be used only with a cart or stand
that is stable and sturdy enough to hold the product. An appliance and cart
combination should be moved with care. Quick stops, excessive force and
uneven surfaces may cause the appliance and cart combination to overturn.
7. Caution: To prevent electric shock, do not use this (polarized) plug with an
extension cord, receptacle or other outlets unless the blades can be fully
inserted to prevent blade exposure.
8.Ventilation - The appliance should be situated so that its location or position
does not interfere with its proper ventilation. For example, the appliance should
not be situated on a bed, sofa, rug, or similar surface that may block the
ventilation openings or, placed in a built-in installation, such as a bookcase or
cabinet that may impede the flow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances (including amplifiers)
that produce heat.
10. Power Sources - The appliance should be connected to a power supply
only of the type described in the operating instructions or as marked on
the appliance.
11. Grounding or Polarization - Precautions that should be taken so that
the grounding or polarization of the appliance is not defeated.
12. Power-Cord Protection - Power supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.
13. Cleaning - Dust the product with a clean cloth. NEVER use water.
14. Non-use Periods - The power cord of the appliance should be unplugged
from the outlet when left unused for a long period of time.
15. Object and Liquid Entry - Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure through openings.
16. Damage Requiring Service - The appliance should be serviced by qualified
service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain.
D. The appliance does not appear to operate normally or exhibits a marked
change in performance.
E. The appliance has been dropped, or the enclosure damaged.
17. Servicing - The user should not attempt to service the appliance beyond
that described in the operating instructions. All other servicing should be
referred to qualified service personnel.
1:13 PM
Page 1
PN.33-2381 4.02
INSTALLATION
S O N A M P
®
A S A P 2
S T E R E O
P O W E R
INSTRUCTIONS
S A T
A M P L I F I E R

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sonamp ASAP2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sonance Sonamp ASAP2

  • Page 1: Installation Instructions

    33-2381 asap2 manual.qxd 4/29/02 1:13 PM IMPORTANT SAFETY INSTRUCTIONS CAUTION: Read all of these instructions before you operate and save instructions for later use. 1. Read Instructions - all the safety and operating instructions should be read before the appliance is operated.
  • Page 2 Serial # ________________________________________ PLACEMENT OF YOUR ASAP2 SAT The ASAP2 is designed to operate automatically and is housed in a compact chassis that can be mounted out of sight. The unit can be placed horizontally on its rubber feet, or the rubber feet can be easily removed by peeling them off of the bottom of the chassis for rack mounting.
  • Page 3 Two pairs of parallel output quick-connect screw terminals are provided. Connect the local loudspeakers to the Speaker A or B terminals on the back of the ASAP2. If using two pairs of speakers, use only speakers with an impedance of 6 ohms or greater. Use bare wire and strip only enough wire (1/4") to fit into the slot in the...
  • Page 4 DIP switch 2 to On position. No Automatic Trigger (Dip switch #4 On -- UP Position) This allows the ASAP2 to stay locked on to the local source bypassing all automatic functions. This application would be used when ASAP2 is in a switched outlet.
  • Page 5 7. Replace the two mounting screws. The following diagrams explain how each SAT module can be used with the ASAP2. SAT modules such as the LR1, AL1, and ASL1(all sold separately) are available. Contact your Sonance- Authorized installer or dealer for more information.
  • Page 6 Sonance 212 Avenida Fabricante San Clemente, CA 92672-7531 SONANCE • 212 Avenida Fabricante • San Clemente, CA 92672-7531 Technical Support (800) 582-0772 ©2002 All rights reserved. Sonance is a registered trademark of Dana Innovations Page 6 WARRANTY COVERAGE (USA ONLY)

Table of Contents