Options - Sony Trinitron BVM-F24E Operation Manual

The monitor is controlled by a separate control unit,
such as an optional BKM-10R/11R Monitor Control
Unit or by daisy chain connections. The BVM-F24E/
F24U/F24A can be connected to the BKM-10R via an
optional BKM-34H Monitor Control Unit Attachment
Kit.
Controlling monitor groups
Up to 32 monitors (BVM series and BVM-D series
monitors) can be controlled from one control unit by
the RS-485 serial remote connections. You can control
individual monitors or monitor groups simply by
entering monitor address or group numbers. You can
also execute the same operation on all connected
monitors, or put all connected monitors into the same
setup and adjustment state.
Setup and adjustment with the Monitor
Memory Card
You can use an optional BKM-12Y Monitor Memory
Card to save and load monitor setup and adjustment
data via the BKM-10R/11R Monitor Control Unit. If
your system includes more than one monitor, you can
use the monitor memory cards to exchange data
between monitors. This makes it easy to put all
monitors in your system into the same setup and
adjustment state.
Auto white balance functions
The color temperature is automatically adjusted with
the auto white balance function by using the BKM-
14L Auto Setup Probe or other industory standard
probes.
Stable color temperature
The internal beam current feedback circuit maintains a
constant color temperature over long periods of time.
Beam landing correction circuit
The beam landing errors caused by the change in CRT
luminance and temperature, and that are caused by the
earth's magnetism can be adjusted manually, or
automatically using the optional BKM-14L auto setup
probe.
Digital uniformity circuit
Uniform white can be reproduced on every point of the
screen, even in the peripheral area, thanks to the built-
in digital uniformity circuit. The uniformity can be
adjusted to match the installation conditions of the
monitor. Automatic adjustment is also possible using
the optional BKM-14L auto setup probe.
Digital convergence circuit
High resolution can be reproduced on every point of
the screen, even in the peripheral area, thanks to the
built-in digital convergence circuit. Using the on-
screen menu, the convergence cross points can be
individually selected and the adjustment can be made
accuratelly to meet any installation requirement.
Other features
• The monitor's various functions and operating
conditions can be set with on-screen menus.
• Has both RS-485 serial remote and relay contact
parallel remote control connectors.
• Built-in test signal generator for crosshatch, 100%
white signal, 20% gray signal, gray scale, and
PLUGE (Picture Line Up Generating Equipment).
• Pulse cross function for simultaneous checking of the
horizontal and vertical synchronization signals.
• Auto and manual degaussing.
• Built-in CRT protection circuit.

Options

For external control
BKM-10R Monitor Control Unit
BKM-11R Monitor Control Unit
A controller, allowing you to control multiple monitors
from one control unit.
BKM-12Y Monitor Memory Card
Memory cards which can be read and written by the
BKM-10R/11R.
BKM-14L Auto Setup Probe
A probe, allowing the automatic adjustment of this
monitor's color temperature.
The probe is also used for white uniformity
adjustment.
For installation
BKM-34H Monitor Control Unit Attachment Kit
Assembly kit for attaching a BKM-10R Monitor
Control Unit to the monitor.
5