Sony Trinitron BVM-F24E Operation Manual page 108

[C1] Setting the Input Configuration (SET UP 1) — INPUT CONFIGURATION Menu
Some of the following menu items which are seleted in
the FORMAT menu are automatically set depending
on the signals.
[C12] SCAN CONVERSION menu
Select the scan conversion of the HD-SDI signal.
×1: No conversion
×2: Twice
×3: Three times
ASD (Alternate Scan Display): For the pseudo
display of the horizontal signals out of the display
ratio such as 1080/24PsF, 25PsF, 30PsF, 50I, 60I
and 720/60P signal formats.
Notes
• When selecting ASD, the characters and lines in
the on-screen menu and SAFE AREA MODE
MENU may not be displayed regularly.
• When the internal signal (channel 91 to 99) is
selected with ASD mode, the progressive display
(×2) instead of the ASD mode is selected (720/
60P signal formats are displayed as 1440/60P
signal format.)
[C13] SAFE AREA MODE menu
Select the display mode for safe area.
CROSS MARK
ASPECT
BLANKING
SAD MODE (SHAPE A)
ASPECT MODE: Set the aspect ratio. k[C131]
H POSITION: Adjust the horizontal display position
of the safe area.
SAD MODE: Select the display of the safe area
marker.
SHAPE A:
SHAPE B:
OFF: Release the SAD MODE.
32
SAD SIZE: Set the safe area size. k[C132]
ASPECT MARKER: Select whether the line to show
the ASPECT MARKER (the boundary of the
aspect area) is displayed or not (ON or OFF).
ASPECT BLANKING: Select the blanking type
outside the area.
HALF: Half blanking.
BLACK: Blanking.
OFF: Do not blank.
CROSS MARK: Select whether the center cross mark
of the picture is displayed or not (ON or OFF).
[C131] ASPECT MODE menu
When the frame of the film is displayed on the screen,
select or set the aspect ratio acoording to the film.
16:9: Set to 16:9 aspect ratio.
4:3: Set to 4:3 aspect ratio.
1.66:1: Set to 1.66:1 aspect ratio.
1.85:1: Set to 1.85:1 aspect ratio.
2.39:1: Set to 2.39:1 aspect ratio.
VARIABLE: Set to the aspect ratio determined by
ASPECT.
[C132] SAD SIZE menu
Select or set the safe area size for the aspect ratio
determined by the ASPECT MODE menu.
ANY SIZE: Adjust the horizontal size of the safe area
in 1% steps by H SIZE and the vertical size by V
SIZE.
ASPECT
80%: Displays a 80 % safe area.
MARKER
88%: Displays a 88 % safe area.
90%: Displays a 90 % safe area.
93%: Displays a 93 % safe area.
SAFE TITLE
DISPLAY [C14] CHANNEL NAME menu
Give the channel a name. Select a preset name, or
enter a new one.
PROG: Program signal
EDIT: Signal from an editor
CAM: Camera signal
VTR: Signal from a VTR
NEW NAME: Enter a new name. (Up to 20 characters
can be entered and up to six characters from the
head of the name are displayed in the INPUT
CONFIGURATION menu ([C1] 2/2).)