[C5] Setting The Screen Display (Set Up 5) - On Screen Set Menu; Overview; Structure Of The On Screen Set Menu - Sony Trinitron BVM-F24E Operation Manual

[C5]
Setting the Screen Display (SET UP 5)
— ON SCREEN SET Menu

Overview

The ON SCREEN SET menu is used to select the type
of information that will be displayed on the screen and
how that information will be displayed.
The types of information that can be set are as follows:

Structure of the ON SCREEN SET Menu

Level 1
INPUT CONFIGURATION C1
REMOTE C2
PASSWORD C3
SYSTEM CONFIGURATION C4
ON SCREEN SET C5
ALIGNMENT C6
WHITE UNIFORMITY C7
EXTEND MENU C8
• SDI signal ancillary data blanking (ANCILLARY
DATA menu) (when the SDI signal is displayed)
• Display mode and position of the signal format
(FORMAT DISPLAY and POSITION menus)
• Display mode and position of the channel number
(CH NO and POSITION menus)
• Display mode and position of the channel name
(CH NAME and POSITION menus)
Level 2
ANCILLARY DATA
FORMAT DISPLAY C51
POSITION
CH NO C52
POSITION
CH NAME C53
POSITION
Level 3
AUTO
ON
OFF
TOP LEFT
TOP CENTER
TOP RIGHT
BOTTOM LEFT
BOTTOM CENTER
BOTTOM RIGHT
41