Sony Trinitron BVM-F24E Operation Manual page 109

[C15] COLOR TEMP menu
Select STD, COL1, COL2 or CH SET.
STD: Use common data.
COL1: Use common data.
COL2: Use common data.
CH SET: Use data for each individual channel.
The factory setting is as follows:
BVM-F24E
STD D65
COL1 D61
COL2 D93
CH SET D65
[C16] COPY FROM menu
Select the source to be copied from.
OTHER CH: Copy data from another channel. Enter
the channel number.
OTHER MONITOR... : Copy data from a BVM-F24
series monitor. k[C161]
MEMORY CARD... : Copy data from a memory
card. k[C162]
[C161] OTHER MONITOR menu
Enter the address number of the source monitor.
MONITOR ADDRESS: Enter the address number of
the monitor from which to copy data. k[C1611]
[C1611] MONITOR ADDRESS menu
Assign the channel of the selected monitor from which
to copy data. k Copy is carried out.
CH NO: Enter the channel number.
[C162] MEMORY CARD menu
Select the file name.
FILE NAME: Select the file name. k[C1621]
Note
The input signal is not displayed during the data
loading.
[C1621] FILE NAME menu
Assign the channel of the selected file from which to
copy data. k Copy is carried out.
CH NO: Enter the channel number.
BVM-F24U/F24A
D65
D61
D65
D65
33