9
Removing / replacing the bobbin case
.04
2
1
Fig. 9 - 04
9
Threading the bobbin thread / adjusting the bobbin thread tension
.05
Fig. 9 - 05
Removing the bobbin case
Open the hook cover
●
Pull out latch 1
●
Remove bobbin case 2
●
Replacing the bobbin case
Push bobbin case 2 into the bobbin case
●
base until you feel it click into place
Close the hook cover.
●
Place the bobbin into the bobbin case,
●
so that this turns in the direction shown
1
by the arrow when the thread is pulled.
Insert the thread as shown in Fig. 9-05.
●
Set the thread tension by turning
●
screw 1.
Setting up
Switch off the machine.
Danger of injury if the machine
starts accidentally!
29