Care and maintenance
12
Care and maintenance
12
Maintenance intervals
.01
12
Cleaning the machine
.02
The cleaning cycle required for the machine depends on following factors:
●
●
It is therefore only possible to stipulate the best possible cleaning instructions for each indi-
vidual case.
To avoid breakdowns, the following cleaning work is recommended for single shift operation:
●
●
68
Clean the entire machine ................................................................................. once a week
Clean the hook compartment .......... once a day, more often when in continuous operation
Oiling the needle head parts ............................................................................... as required
Oiling the hook.................................................................................................... as required
Oiling the bearing points in the arm................................................................once a month
During all cleaning work the machine must be disconnected from the power
supply by switching off the main switch or pulling out the plug!
Danger of injury if the machine is started accidentally!
Single or several shift operation
Amount of dust resulting from the workpiece
For all cleaning work the machine must be disconnected from the mains by
switching off the on/off switch or by removing the mains plug!
Danger of injury if the machine suddenly starts up
Clean hook compartment and needle area of sewing head several times daily.
Clean the entire machine at least once a week.