List Of Parameters - Pfaff 3371-10 series Instruction Manual

11

List of parameters

.08
Group
Gruppe
000
The parameter setting values my only be altered by appropriately trained staff!
Parameter Description
Parameter Bedeutung
001 Maximum speed
This parameter is used to fix the max.
sewing speed (upper limit).
002
Sewing speed for start stitches
With this parameter the speeds for
the 5 start stitches are fixed.
Speed (spm) for start stitch no. 1
Speed (spm) for start stitch no. 2
Speed (spm) for start stitch no. 3
Speed (spm) for start stitch no. 4
Speed (spm) for start stitch no. 5
003 Locking/releasing seam patterns
This parameter is used to release (ON)
or lock (OFF) the individual seam
patterns (0 to 99) to be carried out in
the sewing mode.
004 Switch bobbin thread counter on/off
Standard value (pieces per bobbin)
In the sewing mode, the bobbin thread
counter counts the pieces sewn back-
wards from the standard value. If the
bobbin thread counter is
switched on, in the sewing mode a
signal is given when the value 0 is re-
ached.
005 Sequence combination
This parameter is used to combine se-
veral sequences with each other.
0 = no combination
1 = C1 with C2
2 = C2 with C3
3 = C1 with C3
4 = C1 with C2 and C3
Input
Setting Set value
range
500 - 2500 2500
500 - 2500 500
500 - 2500 900
500 - 2500 2500
500 - 2500 2500
500 - 2500 2500
ON - OFF ON
ON - OFF OFF
1 - 9999
0 - 4 0
57