Cutting Roll Paper After Printing (Mac Os X) - Canon iPF760 User Manual

iPF760
3
Click the Page Setup tab to display the Page Setup
sheet.
4
Select and click a roll paper in the
5
N
Click Roll Paper Options to display the Roll Pa-
per Options dialog box.
6
To enable automatic cutting, click Yes in the
yourself, click Print Cut Guideline.
7
Click OK to close the Roll Paper Options dialog box.
8
Confirm the print settings and print as desired.
•
For tips on confirming print settings, see " Confirming Print Settings(Windows)
Note
Roll paper will be automatically cut after printing.

Cutting Roll Paper After Printing (Mac OS X)

Cutting Roll Paper After Printing (Mac OS X)

This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to
print a cut line for manual cutting.
•
The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps below
to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.
Note
User's Guide
L
Paper Source list.
A
Automatic Cutting list. If you prefer to cut the paper later
Cutting Roll Paper After Printing (Mac OS X)
"
→P.161
153