Resizing Originals by Entering a Scaling Value (Windows)
5
Select the printing application in the
6
Click the Page Setup tab to display the Page Setup
sheet.
7
Select and click a roll paper in the
8
Select the width of the loaded roll in the
(420.0mm).
9
A
In the
Page Size list, click the size of the original as specified in the application. In this case, click ISO
A4.
10
Select the
11
Click ISO A4 in the
12
F
Click
Scaling and enter 120.
•
Note
•
72
13
Confirm the print settings and print as desired.
•
Note
L
C
Enlarged/Reduced Printing check box.
G
Paper Size list.
You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and right
edges of the paper will not be printed.
If the original size after enlargement or reduction is
smaller than the paper size, the original is printed in the
upper-left corner. In this case, you can center originals
E
by selecting
Print Centered on the Layout sheet.
For tips on confirming print settings, see " Confirming Print Settings(Windows)
E
Print Target list.
Paper Source list.
M
Roll Paper Width list—in this case, ISO A2/A3 Roll
iPF760
"
→P.161
User's Guide