Canon iPF760 User Manual page 449

iPF760
Setting Item
Paper Details (The type of paper
is displayed here.)
( *1 )
Paper Details
Keep Paper Type
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Types of Paper.")
The types of paper indicated in the printer driver and related software (as well as on the Control Panel) are updated when you
install the printer driver from the User Software CD-ROM or if you update paper information by using the Media Configuration Tool.
(See Media Configuration Tool Guide (Windows)
Ink Menu
Rep. Ink Tank
Head Cleaning A
User's Guide
Scan Wait Time
Roll DryingTime
NearEnd
RollMrgn
NearEnd Sht
Mrgn
Bordless Margin
Width Detection
Return Defaults
→P.278
Setting Item
Description, Instructions
Specify the time to wait for the ink to dry between each scan (after
the printhead finishes moving in one direction), in consideration of
how quickly the ink dries. Also specify the applicable area for the ink
drying time. Select Entire area to apply the ink drying time after each
scan until the document is fully printed. Select Leading edge to apply
the ink drying time after each scan only in the area 110–140 mm from
the leading edge. (The applicable length varies depending on the
Print Quality setting.) Note that printing will take longer if you specify
the Scan Wait Time setting. In particular, when Leading edge is se-
lected, colors may be uneven in the boundary between the areas with
and without a drying time.
Specify the time to wait for the ink to dry for each sheet.
Specify the minimum margin at the leading edge of roll paper to en-
sure better printing quality at the leading edge.
Note that if you choose 3mm, it may lower the printing quality at the
leading edge and affect feeding accuracy. The printed surface may
be scratched, and ink may adhere to the leading edge. It may also
cause the Platen to become soiled.
Specify a margin at the leading edge of sheets to ensure better print-
ing quality at the leading edge.
Note that if you choose 3mm, it may lower the printing quality at the
leading edge and affect feeding accuracy. The printed surface may
be scratched, and ink may adhere to the leading edge.
Adjust the margin during borderless printing.
Choose Automatic to have the printer automatically detect the paper
width and configure the margin settings for borderless printing. If mar-
gins are mistakenly created when Automatic is selected, choose
Fixed. In this case, the paper width is not detected automatically, and
the document is printed without borders, using the margin settings re-
quired by the printer.
Specify this option to print inside boundaries or in other cases when
specifying a particular starting position for printing. (See "Printing
From a Desired Starting Point.")
Paper width and skew are not detected if you select Off. If paper is
loaded askew, note that paper jams or Platen soiling may occur.
Choose OK to restore Paper Details to the default values.
Print the paper settings as specified in Paper Details.
Select On when printing on a particular type of paper regularly. (See
"Changing the Type of Paper.")
or Media Configuration Tool Guide (Macintosh)
Description, Instructions
Replace the Ink Tank at this point. Follow the instructions dis-
played to complete the required procedure. (See "Replacing Ink
Tanks.")
→P.518
Printhead cleaning options. (See "Cleaning the Printhead.")
→P.525
Execute Head Cleaning A if printing is faint, oddly colored, or con-
tains foreign substances.
Menu Settings
→P.419
→P.402
→P.392
.)
→P.376
449