Canon iPF760 User Manual page 485

iPF760
•
You can specify the frame type by using RemoteUI if the printer's IP address is configured.
•
Note For instructions on installing imagePROGRAF Device Setup Utility, see "Installing imagePROGRAF Device Setup Utility."
.
→P.275
Specifying the frame type using imagePROGRAF Device Setup Utility
1
Start imagePROGRAF Device Setup Utility.
2
In the list of printers, select the printer to configure.
3
Choose Protocol Settings from the Printer menu.
4
Click the NetWare tab and select the frame type in
the NetWare Frame Type list.
User's Guide
Specifying the Printer's Frame Type
485