Canon iPF760 User Manual page 482

Configuring the Printer's TCP/IP Network Settings With RemoteUI
Item
Multicast DNS Service
Name
7
Click OK to display the Network page.
•
If you specify to configure the IP address using DHCP, BOOTP, or RARP, there must be a server that supports such
protocol running in the network.
Note
•
If you specify to configure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by this method is used
first. If you cannot obtain the IP address, the address specified in IP Address is used.
•
It takes up to two minutes to determine whether DHCP, BOOTP, or RARP are available. We recommend clearing check
boxes of options you will not use.
•
If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS servers and DNS
domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS Domain Name, respective-
ly.
When using an IPv6 IP address
1
Start the web browser and enter the following URL in the Location (or Address) box to display the Remo-
teUI page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2
Select Administrator Mode and click Logon.
3
If a password has been set on the printer, enter the password.
4
Click Network in the Device Manager menu at left to display the Network page.
5
Click Edit in the upper-right corner of the TCP/IPv6 group to display the Edit TCP/IPv6 Protocol Settings
page.
6
Refer to the TCP/IPv6 Settings Items table to complete the settings.
TCP/IPv6 Settings Items
Use IPv6
Use DHCPv6
Use a stateless address
Use a manual address
Primary DNS Server Address
Secondary DNS Server Address
482
Use the same host name and domain
name as IPv4
Specify the printer's Multicast DNS service name. (1–63 characters)
This name will be displayed when Bonjour functions are used.
Item
Activate to enable IPv6.
Activate when using a DHCPv6 server to acquire the IP address.
Activate when using an IPv6-compatible router to acquire the IP
address.
Activate when configuring the IP address manually.
IP Address Enter the printer's IP address.
Prefix Length Enter the IP address prefix length.
Default Router Address Enter the default router address.
Prefix Length Enter the prefix length of the default router address.
Specify the IP address of the primary DNS server.
Specify the IP address of the secondary DNS server.
Activate when using the same DNS host and domain names as
for IPv4.
DNS Host Name Specify the printer host name, up to 63 characters (1–63 charac-
ters). Use single-byte letters, numbers, and - (hyphens). Do not
use numbers or - for the first character or - for the last character.
Details
Details
iPF760
Default Setting
Canon iPFxxxx
(xxxxxx)
Default Setting
Off
Off
On
Off
::
0
::
0
::
::
Off
NB-18GBip6xxxxxx
User's Guide