Save & Exit Setup; Exit Without Saving - DFI P5BTX/L User Manual

3.1.12 Save & Exit Setup
When all the changes have been made, highlight " Save & Exit Setup"
and press <Enter>. The message below will appear:
Save to CMOS and Exit (Y/N)? N
Type " Y" and press <Enter>. The modifications you have made will be
written into the CMOS memory, and the system will reboot. You will
once again see the initial diagnostics on the screen. If you wish to make
additional changes to the setup, press <Ctrl> <Alt> <Esc>
simultaneously or <Del> after memory testing is done.

3.1.13 Exit Without Saving

When you do not want to save the changes you have made, highlight
" Exit Without Saving" and press <Enter>. The message below will
appear:
Type " Y" and press <Enter>. The system will reboot and you will once
again see the initial diagnostics on the screen. If you wish to make any
changes to the setup, press <Ctrl> <Alt> <Esc> simultaneously or
<Del> after memory testing is done.
Award BIOS Setup Utility
Quit Without Saving (Y/N)? N
3
55