Setting The Jumpers On The System Board - DFI P5BTX/L User Manual

2
P5BTX/L System Board User' s Manual

2.2.3 Setting the Jumpers on the System Board

2.2.3.1 Jumper Settings for CMOS Clear
Jumper JP5
CMOS Clear
If, for some reason, the CMOS becomes corrupted, the system
can be reconfigured with the default values stored in the ROM
BIOS. To load the default values, power off your system and set
JP5 pins 2 and 3 to On. Wait for a few seconds and set JP5 back
to its default setting, pins 1 and 2 On. You may now power on
your system.
1-2 On: Normal
(default)
22
1 1
2 2
3 3
2-3 On:
CMOS Clear