Power Management Setup - DFI P5BTX/L User Manual

3
P5BTX/L System Board User' s Manual

3.1.4 Power Management Setup

The Power Management Setup allows you to configure your system to
most effectively save energy. If you like to use the soft power down
feature of Windows 95, you must enable the Power Management
below. Select Min. Power, Max. Power or User Defined. Either one can
be used as long as it is NOT disabled.
Power Management
PM Control by APM
Video Off Method
Video Off After
MODEM Use IRQ
Doze Mode
Standby Mode
Suspend Mode
HDD Power Down
Throttle Duty Cycle
VGA Active Monitor
IRQ 8 Break Suspend
The settings on the screen are for reference only. Your version may not be
identical to this one.
Power Management
This category allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before each of the
following modes are activated: Doze mode, Standby mode, and
Suspend mode.
Disable No power management. Disables the Doze, Standby and
Min. Power Saving Minimum power management. Doze Mode = 1
Max. Power Saving Maximum power management. Doze Mode = 1
User Defined Allows you to set each mode individually. When
44
ROM PCI/ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: Disabled ** Reload Global Timer Events **
: Yes IRQ [3-7, 9-15], NMI
Primary IDE 0
: V/H SYNC+Blank
Primary IDE 1
: Standby
Secondary IDE 0
: 3
Secondary IDE 1
: Disabled
Floppy Disk
: Disabled
Serial Port
: Disabled
Parallel Port
: Disabled
: 62.5%
: Enabled
: Disabled
ESC
F1
F5
F6
F7
Suspend modes.
hr., Standby Mode = 1 hr., and Suspend Mode =
1 hr.
min., Standby Mode = 1 min., and Suspend
Mode = 1 min.
enabled, each option ranges from 1 min. to 1 hr.
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
: Disabled
↑ ↓ → ←
: Quit : Select Item
: Help PU/PD/+/- : Modify
: Old Values : Color
(Shift) F2
: Load Fail-Safe Settings
: Load Optimal Settings