Supervisor Password - DFI P5BTX/L User Manual

3
Award BIOS Setup Utility
If you selected EPP , " EPP Mode Select" will appear. This option applies
to standard specification. The options are EPP1.9 and EPP1.7. Default
setting: EPP1.9.
If you selected ECP, " ECP Mode Use DMA" will appear. This is used
to select a DMA channel for the parallel port. The options are 1 and
3. Default setting: 3.
If you selected ECP+EPP, " ECP Mode Use DMA" and " EPP Mode
Select" will both appear on the screen.

3.1.9 Supervisor Password

If you want to protect your system and setup from unauthorized entry,
set a supervisor' s password with the " System" option selected in the
BIOS Features Setup.
If you want to protect access to setup only, but not your system, set
a supervisor' s password with the " Setup" option selected in the BIOS
Features Setup. You will not be prompted for a password when you
cold boot the system.
Use the arrow keys to highlight the " Supervisor Password" option and
press <Enter>. The message below will appear.
Enter Password:
Type in the password. You are limited to eight characters. When done,
the message below will appear:
Confirm Password:
You are asked to verify the password. Type in exactly the same
password. If you type in a wrong password, you will be prompted to
enter the correct password again.
To delete or disable the password function, highlight " Supervisor
Password" and press <Enter>, instead of typing in a new password.
Press the <Esc> key to return to the main menu.
53