Akerstroms SESAM 800 L15 Operating Manual page 22

Configuration of the Receiver
• When all 4 digits are entered correctly the display will show 'PAS'
(passed) and the buttons on the receiver will be unlocked for 60 seconds.
If the PIN is incorrect the display will show 'Err'.
• The receiver will automatically be locked after 60 seconds of button
inactivity. The receiver can also be manually locked by pressing the Enter
button for 5 seconds. The display will show "LOC" when the receiver
switches to locked mode.
To change /delete Receiver PIN do the following:
• The PIN can only be changed by unlocking the receiver and making a
"delete all" erasing all configurations on the receiver.
MC Manager Compatibility:
In the new version of the MC Manager PC application version 1.1 there is an
additional field for PIN code. This allows the user to pre-configure receiver
PIN.
If a memory card is pre-configured with a PIN that is identical to the PIN in the
receiver an automatic copy will be done from the memory card to the receiver
at start-up.
A lost receiver PIN-code can be retrieved with the MC manager.
Sesam 800 Operating Manual
Version: D1
22 (36)
Document-ID: 941211-000
Author: SH