Akerstroms SESAM 800 L15 Operating Manual page 19

Configuration of the Receiver
2. To select what memory position to use (memory positions can be 1-500)
press the Memory Position UP or Memory Position DOWN buttons (see
fig. 5). The flashing left decimal on the display indicates whether the cho-
sen memory position is already used.
a. Transmitters Keyring K3 and Small S3:
Press button 1 on the transmitter if buttons 1-3 shall be used for activat-
ing the relays in the receiver.
b. Transmitter Small S6 and Medium M6:
Press button 1 on the transmitter if button 1-3 shall be used for activat-
ing the relays in the receiver. Press button 4 on the transmitter if button
4-6 shall be used for activating the relays in the receiver.
c. Transmitter Large L15:
Press the button on the transmitter that shall be used for activating relay
1 in the receiver.
3. The display will show "A  " and will return to normal operating mode.
Changing the transmitter push button number and receiver relay relation-
ship
1. Press the Learn/Erase button.
2. Press the Enter button to choose relay, repeated pressure switches relay.
The display shows what relay that will be used. The format is "R=X"
where X is the relay used.
3. Press the button on the transmitter that will activate the relay.
4. The display will show "A  " and will return to normal operating mode.
Sesam 800 Operating Manual
Version: D1
Document-ID: 941211-000
Author: SH
19 (36)