Specifications - US Cutter LaserPoint User Manual

Specifications

LaserPoint Release Date
Controller
Control Panel
Driver:
Maximum Paper Feed Width
Maximum Cutting Width
Maximum Cutting Speed
Maximum Cutting Thickness
Pressure Range
Precision
Plotting Pen
Communications Protocol
Communications Interface
Input Power
Power Consumption
Customer Service Line
Technical Support Line
Technical Support Website
Customer Forums
Manufactured For and Sold
Directly By
October, 2007
16 bit CPU
2x8 LCD 13 button thin-film keyboard
High stepping motor, micro-step driver
28.74 inches (730mm) - 24 inch model
39.37 inches (1000mm) - 36 inch model
51.18 inches (1300mm) - 48 inch model
25.20 inches (640mm) - 24 inch model
35.63 inches (905mm) - 36 inch model
47.64 inches (1210mm) - 48 inch model
15.75 inches (400mm) per second
.039 inches (1mm)
0 - 400g
.1mm
All 11.4mm diameter plotting pens
DM-PL HP/GL; automatic identification
USB (Universal Serial Bus) and RS-232 Serial (9 pin
110 VAC/ 220 VAC 50 Hz / 60 Hz (auto-switching)
Standard power cord included with unit is US-standard 110 VAC
grounded plug.
Less than 100VA
425-481-3555; option #3. Available 8am - 5pm, Mon-Fri
425-481-3555; option #2 Available 9am - 4pm, Mon-Fri
support.uscutter.com
forum.uscutter.com
th
19510 114 Avenue NE, Suite C-1
Woodinville, WA 98072
425-481-3555 phone
888-640-0720 fax
www.USCutter.com
- 46 -