Step By Step Instructions; Starting Signblazer - US Cutter LaserPoint User Manual

Now press the target key to tell the cutter that this is the location where you would like the cut to begin.
If you would like to make other adjustments to the pressure, speed, or other settings you can do so now. If you are setting
up for your first cut with the machine then the default values should be a good starting point.
You can now return to Online Mode. Your cutter is now ready.

Step By Step Instructions

Starting SignBlazer

Making sure that the USCutter LaserPoint is turned on and in On Line mode before starting the SignBlazer software
will help avoid communication problems between the cutter and software.
Open the SignBlazer Software (The Default location will be in the Programs Folders under "SignBlazer Elements for
USCutter").
Navigate to this folder and select "SignBlazer Elements for USCutter".
- 24 -