US Cutter LaserPoint User Manual page 36

After making your changes, you can confirm them by pressing the OK button.
Import an Image
First import an image using the same steps as the "Importing" section of this manual.
Preparing the Image
Once we have an image imported we will need to use it to create a cutting mask that will be the same size
and dimensions of our printed image. The easiest way to do this is to create a cutting mask from the same
image that is going to be printed. To do this without altering the printed image, we will create two
versions of the graphic, one to be printed and one to be converted to a vector image for cutting.
To duplicate the image, first make sure that you have the image selected...
Then select Duplicate from the Edit drop down menu.
- 35 -