Table of Contents
Advertisement
ZN-S100V/ZN-S1000VE HARDWARE MANUAL
1. Audio Input
ZN‐S1000VE has one channel mono audio input.
2. Audio Output
ZN‐S1000VE has one channel mono audio output. As the output power for the audio is low,
amplifier speaker is needed (Do not use a headphone or earphone directly to the camera).
3. Digital Input (DI1, DI2)
ZN‐S1000VE supports two digital inputs. It can be connected either voltage type sensor or
relay type sensor as following Figure 7. and Figure 8.
Do not use voltage and relay type sensor together.
Please pay attention to electric characteristics during installation.
(Detailed instructions are being prepared.)
4. Digital Output (DO1, DO2)
DO devices can be connected as following Figure 9.
2010/2-1 D1A.02
Figure 6. Terminal block
ch1
ch2
GND
1 2
Figure 7. Voltage Type Digital Input Connection
ch1
ch2
GND
1 2
Figure 8. Relay Type Digital Input Connection
Sensor 1
Sensor 2
Sensor 1
Sensor 2
10
Advertisement
Table of Contents
