Table of Contents
Advertisement
About the Product
A Datatron III Series product is a dual-mode device that controls access to printers, copiers,
duplicators, or any other device controllable with a relay closure. Customers use PIN accounts to
pay for products or services.
Vend price structure
The Datatron III supports pricing based on patrons paying for services using PIN numbers entered
on the keypad. The device allows up to two prices.
Copy mode
Patrons are charged for each transaction. Prices are set in the VENDAPIN device.
Cards accepted
The unit will accept only program cards for administrative use.
Dual print/copy operation
The Datatron III was designed to simultaneously control the print and copy modes of
multifunction copiers networked to PCs.
Transaction history
The Datatron III has an extensive capability for tracking vending activity. History meters are
viewed on the display, printed out, or uploaded to a PC and imported into a spreadsheet.
Licenses and Program cards
Before a unit leaves the factory, it is configured with a license, facility or site code (which you
can't change), and up to 2000 programmable PIN codes. You will receive a set of program cards
with your Datatron III system. These program cards contain license codes that match the codes
programmed into your unit(s).
There are no user cards. Users enter PIN numbers on the keypad to activate the Datatron III.
The utility software CD you received with your Datatron III activates computer communications,
not this card.
Advertisement
Table of Contents
