Table of Contents
Advertisement
LCD
Cause
Message
Control Card
Inserted card is wrong format.
Facility Error
Nonmember
This card does not belong to this system.
JCM Card
Control Card
Control Card Error.
Error
Control Cards have to be inserted smoothly
Speed
and quickly. The Datatron is not reading the
Abnormality
card correctly.
PIN CODE
The PIN Code does not match any authorized
Illegal
users.
Card was inserted before the Datatron was
Error
finished with power up reset procedures.
Troubleshooting & Misc.
Error Messages
Solution
This card belongs to a different
system or has become
corrupted. Contact support for
card replacement. Exercise care
to protect cards from magnetic
fields or heat.
This may happen with a Control
Card that has become corrupted.
Possibly improper storage or
handling. Contact support for a
replacement control card.
This may happen with a Control
Card that has become corrupted.
Possibly improper storage or
handling. Contact support for a
replacement control card.
Try inserting the card again,
until you have a feel for the
correct speed. If problem
persists, card reader may be
failing. Contact support.
Enter a new PIN code using
Control card and the standard
menu number 1 as described in
the manual.
Turn power off to unit. Power
back up and wait until display
says ENTER DATATRON PIN
CODE. Then insert Control
Card correctly.
Advertisement
Table of Contents
