Table of Contents
Advertisement
Parameter listing
The table below lists the parameters in the order in which they appear on the display, the
acceptable range of values, and the default setting for each parameter.
NOTE: TO EXIT PROGRAM MODE AT ANY TIME, PRESS C TO GET TO MAIN
MENU, AND REMOVE THE CONTROL CARD. This returns the machine to normal User
Mode idle condition.
Parameter
Menu
To Reset
individual
Counters of
All PINS,
Press 4
(See caution
on Deleting all
PIN accounts)
Description
Provides keypad-only access
to the maintenance menu.
Clear ONE (PIN) count.
Enter the one Pin you wish to
reset.
Press A to confirm each PIN.
When done, press C to return
to program menu.
-OR-
Clear ALL Counts.
Press A to confirm.
Display shows:
Clear all PIN? (counters,
not accounts).
Press A to activate counter
clear.
Then display shows:
Delete all PIN?
Press C to return to program
menu.
Caution: if you press A (not
recommended), you will delete
all accounts and have to
reload them all as if you were
initializing.
t Range
Defaul
Note: Delete ALL
PIN numbers can
take considerable
time.
Caution: You will
None
have to reload all
PIN accounts after
performing this
operation, just as in
Press 3 above.
Advertisement
Table of Contents
