Table of Contents
Advertisement
U s i n g t h e P r i c e M e n u s
You can set two prices on a Datatron III.
When you first turn on the unit, it will be in standby mode, ready for user input, and display:
ENTER DATATRON PIN CODE
Insert the Control Card. The display will change to:
MACHINE
LOAD COMMAND:
Enter the menu Parameters as shown in the following table to control the prices.
Parameter listing
The table below lists the parameters in the order in which they appear on the display, and gives
the acceptable range of values and corresponding default setting for each parameter.
NOTE: TO EXIT PROGRAM MODE AT ANY TIME, PRESS C TO GET TO MAIN
MENU, AND REMOVE THE CONTROL CARD. This returns the machine to a normal User
Mode idle condition.
Setting Copy Prices
Advertisement
Table of Contents
