Table of Contents
Advertisement
• Gain access to these switches by pressing the arrows on either side of the paper cover
toward the REAR of the printer. Then look inside to the right on the PC board. Compare the
settings to the table below.
•
Unless you are very sure of how to do it properly, contact VENDAPIN Support if you think
the settings are incorrect before attempting to change them. Just one switch in the wrong
position can stop all printing data communication between the two devices.
1
ON
OFF
Computer Upload Problems
Datatron III Download Software
Follow the instructions on the CD to properly set up the computer to receive data from the
Datatron III unit.
• Be sure the Com port number, baud rate, and parity are correct, as shown in the screen shot
above.
• Be sure the computer-style serial cable is correctly attached and not damaged.
•
If problems persist after you try this, call VENDAPIN Support.
Printer Switch Settings
2
3
OFF
4
5
ON
OFF
6
LEVEL
ON
ON
OFF
Advertisement
Table of Contents
