VENDAPIN DATATRON III SERIES 5882 Operator's Manual page 10

P r o g r a m m i n g t h e u n i t
Modifying parameters
The unit must be in program mode to modify parameter values. Values can include PIN numbers
for users, and the authorized number of copies for two prices.
Insert the Control Card that came with your unit to enter program mode. You will find that it
works best if you insert it with a quick, smooth motion.
Note: A computer cannot be used for changing parameter settings on the Datatron III.
Configuring the unit for print or copy vending
When you first turn on the unit, it will be in standby mode, ready for user input, and display:
ENTER DATATRON PIN CODE
Insert the Control Card. The display will change to
MACHINE
LOAD COMMAND:
Enter the Menu Parameters as shown in the following table to control the features and prices.
Control Card Menu Selections and Parameters
NOTE: TO EXIT PROGRAM MODE AT ANY TIME, PRESS C TO GET TO MAIN
MENU, AND REMOVE THE CONTROL CARD. This returns the machine to a normal User
Mode idle condition
Your Unit