VENDAPIN DATATRON III SERIES 5882 Operator's Manual page 13

To Audit or Clear
Master
Counters,
Press 6
To Set PRICE
ONE
Press 7
To Set PRICE
TWO
Press 8
To Send Data to
a Printer
connected to the
RJ11 port
Press 9
To toggle the
Beep when a key
is pressed
Press 0
Display shows:
1. Total count
2. Total copies
Select and press your choice 1 or 2.
Read meter.
Select * to clear count to zero.
Select C to quit without resetting.
Display shows:
#1 PRICE
O: (Original Price) N: XX.XX
To exit without changing, Press C.
Enter the new price and Press A to
change.
Press C to return to Program mode
Display shows:
#2 PRICE
O: (Original Price) N: XX.XX
To exit without changing, Press C.
Enter the new price and Press A to
change.
Press C when finished to return to
Program mode menu.
Display shows:
Print Data?
A= YES C= NO
Press A and wait for printer to finish
Display shows:
Set Counter
Beep ON
Press A to toggle it ON or OFF.
Press C to return to Program mode
menu.
None 0 – 999999.99
None 0 – 99.99
None 0 – 99.99
See Printer
None Troubleshooting if you
have problems.
ON N/A