Menu Settings - Sony XDS-1000 Operation Manual

Bit rate selection range
15.00 Mbps to 43.25 Mbps (in steps of 0.01 Mbps)
The clip name when recording DVB-ASI TS
signals
When DVB-ASI TS signals are fed from an XDS-1000/
PD1000/PD2000 unit or a PDW-HR1 which is equipped
with the PDBK-202 and recorded on this unit, clips to be
recorded can be given the same name as that of clips being
fed.
For this, it is necessary to set sub-item EXT NAMING of
setup menu item 036 FILE NAMING to "enable" on this
unit, and set sub-item META PACKET OUT of setup
menu item 926 DVB-ASI SETTING to "on" on the feeder
unit.

Menu settings

Setting the number of audio output channels for DVB-
ASI TS signals: Setup menu item 831 TS OUT
AUDIO MODE
Switching DVB-ASI input/output and setting various
items: Setup menu item 926 DVB-ASI SETTING
Setting the clip name of the DVB-ASI TS signal
recorded: Sub item 3 EXT NAMING under setup
menu item 036 FILE NAMING
About DVB-ASI Input/Output (When the Optional PDBK-202 Is Used)
133