Chase Copy - Sony XDS-1000 Operation Manual

IN indicator
OUT indicator
3
Cue up to the frame where you want to set an OUT
point.
4
Press the PUSH SET knob while holding down the ,
button.
An IN/OUT setting window appears in the bottom
right corner of the display.
The OUT point timecode and the duration (DUR) are
displayed in the IN/OUT setting window, and the OUT
indicator lights.
5
Carry out step 5 and following of the procedure for
"Copying clips to the internal storage" (page 61).
To check the clip with IN and OUT points set
1
Press the < or , button.
An IN/OUT setting window appears in the lower right
of the display.
2
Press the NEXT or PREV button.
The unit cues up the frame with the IN (or OUT) point
set.
To delete the IN/OUT points
1
Press the < button (or , button).
The IN/OUT setting window appears in the bottom
right corner of the display.
2
Press the RESET button.
The IN (or OUT) indicator turns off.
Note
One of the following operations deletes the IN/OUT points
automatically.
• Change the selection of media.
• Remove the media.
• Delete the clip in which IN/OUT points are set.
• Format the media.

Chase copy

When a clip is being recorded to the internal storage, that
clip can also be duplicated/copied on the internal storage,
to an SxS memory card at the same time.
If FTP connections are made between this unit and a
computer (see page 84), it is also possible to perform chase
copy of clips or files when they are being transferred from
the computer.
It is also possible to perform chase copy by carrying out
the simultaneous recording operation. For the
simultaneous recording, see page 50.
1
Carry out the procedure described in"Carrying out
recording" (page 50) to start recording to the internal
storage.
2
Press the THUMBNAIL button to display a clip list
screen.
3
Select the clip that is being recorded.
4
Press the COPY button.
The Clip Copy screen appears.
5
Press the START function button (F5).
The copy processing for the selected clip starts.
The copy icon lights in the status display area.
6
Select the copy destination media.
MEMORY: SxS memory card
INTERNAL: Internal storage
The Clip Copy screen displays the progress of copy
processing.
To turn off the display of copy processing progress
Press the DISP OFF function button (F6).
To abort the copy processing
63
Copying