Getting Started; Resetting The Unit; Performing Initial Settings; Preparing The Remote Commander - Sony XAV-622 Operating Instructions Manual

Getting Started

Resetting the unit

Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Press the reset button (page 10) with a pointed
object, such as a ballpoint pen.
Note
Pressing the reset button will erase the clock setting
and some stored contents.

Performing initial settings

After resetting, the display for the initial settings
appears. (The following illustration is for East
Asia models.)
Initial Setting
Rear/Sub Out
Listening Position
Name Character
1
Touch "Rear/Sub Out" to set the
subwoofer connection status.
If a subwoofer is connected, select "Sub."
If a power amplifier is connected, select
"Rear."
If neither a subwoofer or power amplifier is
connected, you can select either "Sub" or
"Rear."
2
Touch "Listening Position" to set the
listening position.
Set to "Front L" if your listening position is
front left, or "Front R" if front right.
3
Touch "Name Character"/"Language"
to set the character encoding/display
language.
Touch repeatedly until the desired character
encoding/display language appears.
For East Asia models, select the character
encoding.
For Middle East models, select the display
language.
4
Touch "OK."
The setting is complete.
This setting can then be further configured in the
setting menu.
14
Rear / Sub
Front L / Front R
Chinese
OK
• For details on setting the subwoofer connection
status, see page 41.
• For details on setting the listening position, see
"Optimizing sound for the listening position —
Intelligent Time Alignment" on page 33.
• For details on setting the character encoding,
see page 38.
• For details on setting the display language, see
page 38.
Note
For East Asia models, some characters may not be
properly displayed correctly, depending on the
language/country/region.
Preparing the remote
commander
Before using the remote commander for the first
time, remove the insulation film.