Sony XDS-1000 Operation Manual page 77

2
Display the P1 EDL page of the Clip F menu and press
the SET CURT.EDL (F1) button.
The selected EDL becomes the current EDL.
When the current EDL is specified, the current EDL
icon appears in the status display area.
Adding in clip list screens
See page 65 for information about screen operations.
1
On a clip list screen, select the clip to add as a sub clip
(multiple selections possible).
2
Press and hold the SHIFT button and press the PUSH
SET knob or display the P1 EDL page of the Clip F
menu then press the ADD TO CURT.EDL (F4)
button.
The sub clip addition starts. When addition is finished,
the screen displayed during execution disappears and
returns to the clip list screen. Adding a sub clip
simultaneously saves the EDL.
The clip is added to the end of the current EDL. The
current EDL remains selected.
Adding in the video monitor screen
When checking the image on the video monitor screen, a
range to use as a sub clip can be specified and added to the
current EDL. This operation is supported during playback
(including when stopped) and when searching. During
recording, the currently recording clip cannot be added as
a sub clip to the current EDL, but IN/OUT points can still
be set.
1
On the video monitor screen, cue the frame you want
to specify for the IN point.
2
Press and hold the < button, and then press the PUSH
SET knob.
The IN/OUT setting window appears on the bottom
right of the display.
The timecode for the IN point is displayed in the IN/
OUT setting window, and the IN indicator is lit.
IN indicator
OUT indicator
3
Cue the frame you want to specify for the OUT point.
4
Press and hold the , button, and then press the PUSH
SET knob.
The IN/OUT setting window appears on the bottom
right of the display.
The timecodes for the OUT point and duration (DUR)
are displayed in the IN/OUT setting window, and the
OUT indicator is lit.
5
Display the function menu, and then press the ADD
TO CURT.EDL (F4) button.
The sub clip addition starts. When addition is finished,
the screen displayed during execution disappears and
returns to the clip list screen. Adding a sub clip
simultaneously saves the EDL.
The clip is added to the end of the current EDL. The
current EDL remains selected.
To delete sub clips
This operation is performed on the chapter thumbnail
screen.
1
In the chapter thumbnail screen, select the thumbnails
for the sub clips you want to delete (multiple selections
possible).
2
Press the PAGE/HOME button to display the function
menu, and press the REMOVE function (F4) button.
A confirmation message appears asking whether to
execute the delete operation.
3
Select "OK", and then press the PUSH SET knob. To
abort, select "Cancel".
77
EDL Editing