Using The Menu; Operation - Sony PCS-11 Operating Instructions Manual

Off: Deactivates DHCP. In this case
set your IP address, network mask,
gateway address and DNS address
manually.
Host Name: Enter your host name (up
to 30 characters).
IP Address: Enter your IP address.
Network Mask: Enter your network
mask.
Gateway Address: Enter your default
gateway address.
DNS Address: Enter your DNS
(Domain Name System) server
address.
Note
When you set "DHCP Mode" to "Auto",
the assigned IP address is shown in the
launcher menu (page 72) or Machine
Information menu (page 54).
When you do not know how to set up the
LAN configuration, contact your
network administrator.
10
Use the V, v, B or b button to select
"Next", then press the PUSH ENTER
button.
The message window for confirmation
appears.
Save
Previous
11
Use the V, v, B or b button to select
"Save", then press the PUSH ENTER
button.
The settings are saved.
To cancel the setting
V, v, B or b
Press the
"Cancel", then press the PUSH ENTER
button.
To go back to the previous wizard
V, v, B or b
Press the
"Previous", then press the PUSH ENTER
button.
Cancel
button to select
button to select

Using the Menu

The Video Communication System uses the
on-screen menus to make various
adjustments and settings. This section
describes how to adjust or set the items in the
menus and gives a brief introduction of the
menus.
For the menu configuration, see page 205.

Operation

The basic operation through the menu is
explained by taking the Setup menu.
1
Press the MENU button on the
Remote Commander, or press the V,
v, B or b button to select "Menu" and
press the PUSH ENTER button in the
launcher menu.
The Setup menu appears.
Setup
Video/Audio
Keep pressing the [MENU] button to show
more detailed setup menus.
2
Press the b button, or press the PUSH
ENTER button.
The top item is selected.
Setup
Video/Audio
Keep pressing the [MENU] button to show
more detailed setup menus.
Sound Priority
Save Cancel
Sound Priority
Save Cancel
29
Using the Menu