Sony XDS-1000 Operation Manual page 93

Item number Item name
013 SYSTEM FREQUENCY
SELECT MENU
017 SUB STATUS DISPLAY SELECT Sets the sub status display that is output from the COMPOSITE OUTPUT
027 SD CHARACTER
Sub-item
1 SD-SDI2
2 MONITOR SD
3 LCD/VGA
028 HD CHARACTER
Sub-item
1 HD-SDI2
2 MONITOR HD
Settings
Specify whether to enable switching the system frequencies.
off: Do not enable switching the system frequencies.
on: Enable switching the system frequencies.
You can switch between the following frequencies.
1080/59.94i, 50i, 29.97P, 25P, 23.98P, 720/59.94P, 50P
For details about switching the system frequencies, see page 40.
Note
Settings for both basic and extended menu items are saved separately for
different system frequencies.
• 1080 59.94i/29.97P
• 1080 50i/25P
• 1080 23.98P
• 720 59.94P
• 720 50P
Therefore, when you switch system frequencies, all menu items are reset to
the current settings for the new mode. (They are different from the setting for
the previous mode.)
MONI/2, HD-SDI OUTPUT1 2 (SUPER), HD-SDI MONITOR/OUTPUT2 2
(SUPER), SD-SDI OUTPUT1 2 (SUPER), and SD-SDI MONITOR/
OUTPUT2 2 (SUPER) connectors.
off: Sub status is not output.
media: Type of media currently in use.
edit preset [edit]: Edit preset status
media & edit preset [md&ed]: Type of media currently in use and edit
preset status
Specify whether to superimpose text information on the SD video signal.
b)
Specify whether to superimpose text information on the video signal output
from the SD-SDI OUTPUT1 2 (SUPER) connector.
off: Do not superimpose.
on: Superimpose.
b)
Specify whether to superimpose text information on the video signal output
from the SD-SDI MONITOR/OUTPUT2 2 (SUPER) or COMPOSITE
OUTPUT MONI/2 connector.
off: Do not superimpose.
all: Superimpose on the outputs from both the above connectors.
comp: Superimpose on the output from the COMPOSITE OUTPUT MONI/2
connector.
sdi: Superimpose on the output from the SD-SDI MONITOR/OUTPUT2 2
(SUPER) connector.
Specify whether to superimpose text information over the display on the
front panel, and on the video signal output from the MONITOR (VGA)
connector.
off: Do not superimpose.
on: Superimpose.
Specify whether to superimpose text information on the HD video signal.
Specify whether to superimpose text information on the video signal output
from the HD-SDI OUTPUT1 2 (SUPER) connector.
off: Do not superimpose.
on: Superimpose.
Specify whether to superimpose text information on the video signal output
from the HD-SDI MONITOR/OUTPUT2 2 (SUPER) connector.
off: Do not superimpose.
sdi: Superimpose.
a)
a)
93
Setup Menu