Sony XDS-1000 Operation Manual page 102

Item number Item name
618 UPCONV EMBEDDED VITC
a)
619 VITC
638 TIME CODE FOR VDCP CONTROL Make a setting for timecode generated when the REC INIT command or
651 UMID SDI OUTPUT
652 UMID SD VANC LINE
653 UMID HD VANC LINE
657 ESSENCE MARK SDI OUTPUT
660 ESSENCE MARK SD VANC LINE
665 ESSENCE MARK HD VANC LINE
102
Setup Menu
Menu items in the 600s, relating to the timecode, metadata, and UMID
Settings
a)
Select the source of the VITC embedded into output HD-SDI signal when
up converting during playback of an SD clip.
VITC: Select the VITC of the SD clip.
LTC: Select the LTC of the SD clip.
Select whether to record the VITC generated by the internal timecode
generator during IMX recording.
off: Do not record the internally generated VITC.
on: Record the internally generated VITC.
Note
Even if this item is set to "off", VITC is recorded if the input video signal
contains VITC and the VITC line is set to "throu" in menu item 723.
CUE WITH DATA command is executed from a VDCP-compliant
controller.
REC:VDCP PB:TC [VDCP]: Recording timecode is continuous timecode
REC:TCG PB:TC [menu]: Timecode for recording depends on the
REC:VDCP PB:Zero Base [VDCP/0]: Recording timecode is continuous
REC:TCG PB:Zero Base [menu/0]: Timecode for recording depends on
Select whether to output UMID in the VANC of the SDI output.
off: Do not output.
on: Output.
See "Using UMID Data" (page 134) for more information about UMID.
a)
Select the line in which UMID is output when menu item 651 is set to
"on".
12H, 13H, 15H, 16H, 17H, 18H, 19H (59.94i/59.94P/29.97P mode)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H, 18H (50i/50P/25P mode)
See "Using UMID Data" (page 134) for more information about UMID.
Select the line in which UMID is output when menu item 651 is set to
"on".
9H to 17H to 20H (59.94i, 50i, 29.97P, 25P, 23.98P mode)
9H to 17H to 25H (59.94P, 50P mode)
See "Using UMID Data" (page 134) for more information about UMID.
Select whether to output essence marks in the SDI output VANC.
off: Do not output.
on: Output.
a)
Select the line to which to output essence marks when menu item 657 is
set to "on".
12H, 13H, 15H, 16H, 17H, 18H, 19H (59.94i/59.94P/29.97P mode)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H, 18H (50i/50P/25P mode)
Select the line to which to output essence marks when item 657 is set to
"on".
9H to 17H to 20H (59.94i, 50i, 29.97P, 25P, 23.98P mode)
9H to 17H to 25H (59.94P, 50P mode)
starting from 00:00:00:00 generated in accordance with the VDCP
controller. Timecode for cueing is the same as clip timecode.
settings of the menu items related to the timecode generator.
Timecode for cueing is the same as clip timecode.
timecode starting from 00:00:00:00 generated in accordance with the
VDCP controller. Timecode for cueing is generated taking
00:00:00:00 as the timecode value of the clip's first frame.
the settings of the menu items related to the timecode generator.
Timecode for cueing is generated taking 00:00:00:00 as the
timecode value of the clip's first frame.