Oven-User Interface; Alarm Messages - Unox XVC Instruction Manual

Oven-user interface

When there are several ALARM/WARNING MESSAGES, the user can scroll through these by repeatedly pressing
START/STOP .
Display Description
AF - OVEN ALARMS
AF01
Motor thermal alarm
AF02
Safety thermostat alarm
AF03
Oven cavity alarm
AF04
Communications failure alarm
Communications failure with gas
AF05
board
AF06
Fume temperature in gas oven alarm
AF08
Motor tachometer
AF09
No/little water supply during wash
Incorrect CRC alarm in EEPROM
AF010
for essential parameters
No 230 V power supply to the gas
AF011
board
No 230 V power supply to the
AF012
chicken cabinet
ChefTop
The ovens show any alarm/warning messages regarding
their display screens.
tions that nevertheless allow the appliance and pe-
ripherals to operate, though with a restricted set of
functions.
Pressing button
THE SCREEN.
- The alarm messages
that fail to allow any appliance/peripheral operation
whatsoever, and therefore must be put into STOP
mode. If the alarm messages strictly refer to the pe-
be used.
Effect
The oven stops any operating
mode and blocks any screen display
configuration
The oven stops any operating
mode and blocks any screen
display configuration. Turn the
oven's power on and off to
override the alarm and use the
The oven stops any operating
mode and blocks any screen display
configuration
67
BakerTop
™
WARNING
clears the Warning list from
Troubleshooting
Contact the Customer Assistance
Service
Check the plumbing.
Once the water supply has been
restored, cut and restore power
to the oven and promptly start a
washing cycle.
Contact the Customer Assistance
Service
™
-
English