After-Sales Assistance - Unox XVC Instruction Manual

After-sales assistance

In case of any malfunctions, disconnect the appliance from its power and water supply. Consult the solutions
proposed in the " Table F" .
Table F
Malfunction
The oven is completely
switched off.
No steam is produced in-
side the oven cavity.
After the time has been
set and the START / STOP
button pressed, the oven
does not start.
Water escapes from the
seal while the door is shut.
XBC
ly
) - Ita
e (PD 5
gh .57 .55
ne 9 86
Ca do 9 04
0 - +3 m
.A . - 35 01 Fa x: ox .co
S.p a, 22 1 - w. un
OX an .57 .51 ww
UN jor 9 86
Ma 04 .co m
Via 39 ox
Te l.:+ @ un
in fo
Possible cause
- No mains power.
- Appliance out of order.
- Water inlet closed.
- Appliance plumbed
into the water mains
or the tank incorrectly.
- No water in the tank
- Water supply filter
clogged with impuri-
ties.
Door open or not shut
properly.
- Seal is filthy.
- Seal is damaged.
- The handle mecha-
nism is loose.
ChefTop
If the solution is not listed in the table, contact a UNOX
authorized technical customer service. Provide the fol-
lowing information:
- the date of purchase;
- the appliance data on the serial plate;
chapter "Oven-user interface" at page 67
Manufacturer's information:
UNOX S.p.A.
via dell'Artigianato, 28/30
Tel +39 049 8657511 - Fax +39 049 57555
Possible solution
Make sure the appli-
ance is connected to
the electricity mains.
- Open water inlet.
- Make sure the appli-
ance is plumbed into
the water mains or
the tank correctly.
- Fill the tank with wa-
ter.
- Clean the filter.
Make sure the door is
shut.
- Clean the seal using a
damp cloth.
- Contact a specialised
technician to request
the necessary repair
work.
77
BakerTop
™
Problem solution
Contact the Customer As-
sistance Service.
Contact the Customer As-
sistance Service.
Contact the Customer As-
sistance Service.
Contact the Customer As-
sistance Service.
™
English