Programmed Operation - Unox XVC Instruction Manual

PROGRAMMED Mode
LAST PROGRAM
APPEARS ONLY IF A MANUAL
PROGRAMME WAS ENGAGED
RESTART
APPEARS ONLY IF A PROGRAMME
IS INTERRUPTED
PURE
P01
....
P99
LAST PROGRAM
2
RESTART
2
POSITION OF
PROGRAMMES SAVED BY
THE USER
1
1
ChefTop
ChefUNOX - BakerUNOX
+3 REGEN - STEAM - GRILL
FAKIRO GRILL - PAN FRY
MULTITIME - FAKIRO PIZZA
POLLO - COMBI BAKE
BAGUETTE - ROASTING
CRISPY ROAST - NIGHT ROAST
BRAISE
ACM01
...
ACM20
PUMP LOADING
COOL
LONG WASHING
MED WASHING
SHORT WASHING
QUICK WASHING
SEMI AUTO WASHING
H2O WASHING
This function fully repeats the last cooking cycle per-
At the end of the executed cooking cycle, press the
button -> the message LAST PROGRAM ap-
pears on screen "8".
Press the button -> the last cycle executed
START/STOP
starts.
If a cooking programme was interrupted in advance
this function resumes it from the precise stop point
while maintaining the same parameters set.
Press the
message RESTART.
Press the button: the last cooking cycle ex-
START/STOP
ecuted resume.
57
BakerTop
™
POSITIONS OF
PROGRAMMES
SAVED BY THE
USER WITH ADAP-
TIVE.Clima technology
displays the
™
English