Oven-User Interface - Unox XFT LineMiss Instruction Manual

Oven-user interface

When there are several
Display Description
OVEN
The motors have overheat-
ed
The safety thermostat has
overheated
An error has been detected
in the data recorded by the
cavity probe
Communication between
the control P.C.B. and the
power P.C.B. has been cut
off
The temperature of the
oven power P.C.B. is too
high
PROVER
An error has been detected
in the data recorded by the
prover cavity probe
garding the oven or prover on the display.
functions that nevertheless allow the appliance
and peripherals to operate, though with a restrict-
ed set of functions.
Pressing the
ING MESSAGES from the screen, using the
button to switch between OVEN and PROVER calls
the list back to the screen.
- The alarm messages
eration whatsoever, and therefore must be put into
STOP mode. If the alarm messages strictly refer to
be used.
, the user can scroll through these by repeatedly press-
Effect
Oven shutdown
Oven shutdown
Oven shutdown
Oven shutdown
There is a risk of permanent
damage to the power P.C.B.
Prover shutdown
29
LineMiss
U - WARNING
button erases the list of WARN-
Troubleshooting
Contact the Customer Assis-
tance Service
Contact the Customer Assis-
tance Service
Contact the Customer Assis-
tance Service
Contact the Customer Assis-
tance Service
Make sure the positioning
standards specified in the in-
stallation manual have been
observed. Contact the Custom-
er Assistance Service
Contact the Customer Assis-
tance Service
™
-
-
-
-
English