Bakertouch Digital Control Panel; Operation In Conjunction With Digital Control Panel - Unox BakerTop XL 405 Instruction Manual

BakerTop
™

BakerTouch digital control panel

Operation in conjunction with digital control panel

The prover XL405 is not equipe with a digital control panel so it is necessary to have a BakerTop™
oven to controll it. (connect the prover to the oven with the cable RJ45).
The system also works in standalone mode, however, whether connected to the oven can use a range
of useful data and the osmosis system.
The "BakerTouch" control board works by touching the slik-screen printed glass (Use only your finger
and no other objects such as knives, forks etc). This way the user can set the appliance functions and/
or the required settings.
This type of technology allows the quick and easy cleaning of the digital control panel and also ensures
maximum reliability by avoiding any type of mechanical movement.
Control board Layout:
1 2 3 4 5 6
Power up/ Power down
When the prover is connected to the power supply, the control panel automatically turns on.
After 15 minutes if none of the buttons have been pressed and if none of the devices connected to the
electronic control panel (ovens, provers, blast chiller) are operating, it will enter the standby mode:
only the led will remain lit.
To reactivate the electronic control panel, simply press the button.
To activate standby mode, press and hold the button pusher for 6 seconds while the control is on;
to reactivate the panel, press the button again.
Prover selection
The selection of the appliance (prover) to control is made with the button with the BakerTouch
panel until on the display 6 appear no. 6.
English
9