Message Waiting Indicator - Aastra 6730i User Manual

Using the Goodbye Key to Cancel Incoming Calls Feature
IF
"Goodbye Key Cancels Incoming Call" is
enabled AND a second call comes in while
you are on an active call,
"Goodbye Key Cancels Incoming Call" is
disabled AND a second call comes in while
you are on an active call,
"Goodbye Key Cancels Incoming Call" is
disabled AND a second call comes in while
you are on an active call,

Message Waiting Indicator

You can configure the Message Waiting Indicator (MWI) to illuminate for a specific line or for
all lines. For example, if you configure the MWI LED on line 3 only, the LED illuminates if a
voice mail is pending on line 3. If you configure the MWI LED for all lines, the LED illuminates
if a voice mail is pending on any line on the phone (lines 1 through 6).
You configure the MWI indicator using the Aastra Web UI.
Configuring Message Waiting Indicator
Use the following procedure to configure the message waiting indicator on a specific line or on
all lines on the IP phone.
172
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
IP Phone UI
Aastra Web UI
Note:
"Message Waiting Indicator Line" parameter is set to ALL lines by
default.
THEN
press the Goodbye key to reject the second
incoming call.
press the Goodbye key to hang up on the
active call so you can answer the second
incoming call.
press the Left Arrow 3 key to ignore the
second incoming call and remain on the active
call
OR
press the Right Arrow 4 key to answer the
second incoming call.
Model 6730i IP Phone User Guide