Aastra 6730i User Manual page 185

Refer to the following example.
Phone A calls the SCA number and
all the phones in the SCA enironment
ring.
Note: A user can place a call on hold while in an SCA bridged call, by pressing the SCA line key.
Using the example above, when a call comes into Phone 1, Phone 2 and Phone 3 can pickup the
same call by pressing the SCA line key. Phone 2 and 3 display the call they are bridging into on the
LCD of the phones. Existing SCA parties in a bridge or one-to-one call hear an audible beep when
another party has joined the call.
If a phone is configured for SCA bridging and it attempts to join a call, but the account on the
server does not have this functionality enabled, an error message displays to the LCD on the
phone.
The SCA call bridging feature is disabled by default on all phones. Your Administrator can enable/
disable this feature if required. Contact your System Administrator for more information.
Model 6730i IP Phone User Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Phone A
Note: Your Administrator must enable/disable the beep on the server-side.
Phone 1
Phone 2
SCA Environment
Phone 3
SCA phone 1 answers.
When 2 and 3 pickup,
1 can hangup.
SCA phone 2 joins by
pressing SCA line. When
phone 1 hangs up, 2 is still
connected. Phone 2 can
press the line key to
put SCA call on hold
leaving 3 still connected
to 1.
SCA phone 3 joins by
pressing SCA line. When
phone 1 hangs up, 3 is still
connected. Phone 3 can
press the line key to
put SCA call on hold
leaving 2 still connected
to 1.
179